Equipment

The main advantage of this device is the presence on Board the built-in digital interfaces RS-232, RS-485, CAN, 1-WIRE, allowing you to connect different equipment, depending on the needs of the client (various sensors, external CAN-module, Autoconductor, Camera VC0607, WIFI, ZM Camera, MODBUS RTU, cuss, PP-01, tachograph, display ITLINE, etc.). Built-in CAN-module allows you to connect and read data from the CAN-bus of the vehicle without purchasing additional equipment.

Advanced functionality of this device is also due to the presence of a large number of discrete, analog inputs and outputs: 4 inputs plus, 6 inputs minus (4 universal, input / output), 4 outputs. To effectively monitor the condition of the vehicle or the equipment installed on it, the device can be connected to discrete, analog and pulse-frequency sensors. Four programmable ground-to-ground outputs allow remote control of systems such as auto-start or engine lock.

The ability to use the battery makes the tracker protected from unexpected power failures, preventing unwanted data loss, as well as provides offline operation.

The device is installed under the dashboard of the car, does not position itself externally, there are no glowing bulbs and loud beeps. This is designed to be able to mount the tracker hidden from transport drivers.

It will show

• the current location of the vehicle;
• vehicle speed;
• stops and Parking (time, place, duration);
• number of hours;
• data from the vehicle's on-Board computer (fuel consumption, engine speed, temperature, etc);

* To expand the functionality you need to connect additional equipment.

The main advantage of this device is the presence on Board the built-in digital interfaces RS-485 or RS-232 (depending on version) and 1-WIRE. This allows the customer to connect different equipment, depending on the customer's needs (different sensors, external CAN-module, Camera VC0607, ZM Camera, iDataLink, StartCan, etc.).

The ability to use the battery makes the tracker protected from unexpected power failures, preventing unwanted data loss, as well as provides offline operation.

The device is installed under the dashboard of the car, does not position itself externally, there are no glowing bulbs and loud beeps. This is designed to be able to mount the tracker hidden from transport drivers.

It will show

• the current location of the vehicle;
• vehicle speed;
• stops and Parking (time, place, duration);
• number of hours;

* To expand the functionality it is necessary to connect additional equipment.

ARNAVI BEACON is an autonomous satellite device for determining location.

It can be installed on the monitoring object (for example, in a car), without connecting to the on-Board electrical network of the object.

In case of theft or control, the beacon makes it possible to determine the exact place where the object is.

To determine the location uses GPS/GLONASS navigation system, in cases where the object falls into the zone of absence of GPS signal (underground Parking, garage box), the location will be determined using LBS positioning technology. The device uses a standard size batteries - AA (finger).

Three modes are available to the user:

• Interval - communicates strictly according to the specified interval;
• Active - the event triggering the motion sensor (start of movement end of movement);
• Online - works on the principle of the tracker: working out the trajectory of the angle, speed, distance, time.

The main tasks facing the specialists of our company in the design of a new fuel level sensor were to ensure high reliability and accuracy of measurement.

The sensor is cut to the height of the tank and installed by drilling the tank strictly in the middle. After installation, it is necessary to calibrate (dimensional capacity is filled with fuel in the tank of 10 liters and recorded readings after each Bay (up to a full tank).

It will show

• the current amount of fuel in the tank (in liters);
• volume of refills (in liters);
• current fuel consumption (liters per hour);
• fuel consumption per trip (from stop to stop);
• quantity of the merged fuel (in liters);
• average consumption (number of liters per kilometer)

Suitable for reading the basic parameters (engine hours, fuel consumption, mileage, etc.), and for specialized (axle load, turn signals, seat belts). This device is convenient to have two of the most popular digital interfaces RS-232 and RS-485, which increases the range of compatible equipment.

"ARNAVI CAN" is suitable for any type of equipment (from cars to special equipment), all models of cars were supported by the integration of protocols of different vehicles, which increases the accuracy of the transmitted information and the list of read parameters.

To date, there is a list of cars 300+ already supported in this device, but on request, developers can add any missing car.

It will show

• mileage;
• fuel consumption (in liters);
• coolant temperature;
• axle load;
• the position of the gas pedal;
• AdBlue liquid level;
• the load on the engine;
• fuel temperature;
• full time operation;
• full mileage;

WARNING! The device does not calculate, but only reads the parameters that are issued by the on-Board computer of the vehicle. Therefore, the list of these parameters may vary depending on the make and model of your car. In order to find out what parameters are available on your equipment, you need to send a request (form where the client writes mail, phone, make, model of the machine and year of manufacture

It will show

• current temperature (in refrigerator, engine, cabin);
• graph of temperature changes over a period of time;
• notifications of violation of the temperature regime (violation of the maximum or minimum specified permissible values)

This solution increases the anti-theft ability of the security complex. The blocking relay has small dimensions and allows it to mask in a harness of regular wiring. The main and undeniable advantage of this device - no need to lay wires from the tracker to the relay, as the detection of the tracker on the wire you can find the relay, and with this device it is impossible. In addition, the system is designed in such a way that the lock relay constantly checks the presence of a connection with the "control part" located in the tracker, and, in the absence of communication, the relay breaks the circuit automatically. For example, an attacker found the installed navigation controller, cut the wires and threw the device, the relay does not detect the connection with the "master part" and automatically blocks the engine, preventing the attacker to start the car.

The kit is designed for use on all types of vehicles powered by the on-Board network with a grounded negative battery output with a rated voltage of +12V.